Item#: 246
General Formulations 246 White Flexible Polymeric Vinyl - Permanent Adhesive
- Concept® 246 is a premium 2.4 mil polymeric gloss white vinyl film coated with a permanent grey solvent acrylic pressure sensitive adhesive laminated to a 90# sta-flat liner.
- This product is recommended for indoor and outdoor uses where flexibility, durability and resistance to sunlight are required.
- These films can be used for fleet and vehicle graphics, architectural signage, commercial-retail signage, point-of-purchase graphics, and decals that require blockout properties.
Technical Specifications
|
Adhesion
|
- To Glass 2 Oz/ in.
- To Stainless Steel 2 Oz/ in.
- Tested according to PSTC-1 with 24-hour dwell at 70° F and 50% relative humidity.
- Typical values. Individual values may vary. Test thoroughly before production.
|
|
Dimensional Stability
|
Good
|
|
Expected Exterior Exposure
|
- GF 255 contains UV inhibitors to extend exterior life.
- However any clear vinyl film can yellow with exposure to UV radiation.
- Must be tested for specific usage.
|
|
Humidity Resistance
|
Good
|
|
Storage Stability
|
One (1) year shelf life when stored at 70° F and 50% relative humidity.
|
|
Temperature Ranges
|
- Minimum application temperature +40° F.
- Service temperature -40° F to +180° F.
|
|
Thickness
|
- Film 2.8 to 3.2 mils.
- Adhesive .7 to 1.0 mils.
- Liner 2.0 mils.
- (Thickness variance +/- 10%)
|
|
Water Resistance
|
Good
|
Copyright ©
2024
Read&Co.. All Rights Reserved.
TOP