Vescom Polster 20oz Non Woven

Type II PV
Commercial Grade, Class A Fire Rating
Meets EPA requirements for low VOC emitting products
Phthalate free substrate
Compatible with all Latex, Eco-Solvent, Solvent, and UV Inks
Certified for HP Latex Inks

Tell a Friend

Overview
Resources

Technical Specifications

A*	-.18
B*	-.62
Backing	Non Woven Backing
Brightness	87.1
Color	Bright white PVC
Core Size	3" ID core
Finish	Liquid top coatings can be used for added protection or desired finishes. To achieve Type II results, product must be paired with Marabu ClearShield Wall Armor.
Fire Rating	Class A
Gauge	18 mil
Gloss Level	6.4 (60)
GSM	448
Ideal Storage Conditions	70° F (21° C), 50% R.H. (a controlled environment is recommended); store vertically in original packaging.
Ink Compatibility	Compatible with all low-solvent, solvent, UV-curable and latex printers.
L*	94.33
Light Fastness	The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. Contact the ink manufacturer for light-fastness data.
Material Type	100% PVC Face
Opacity	100%
Optimal Service Environment	For printing: 60°-80° F, 50% Relative Humidity. For end use: -40°-176° F (-40°-80° C).
RIP & Printer Media Settings	Optimal printer settings will vary from printer manufacturers. A suggested starting point is setting the pre and post heaters to 122° F (50° C). For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. If a custom profile is not available, the on-board media setting, Cast Vinyls, typically used for vehicle wraps, is a good place to start.
Shelf Life	1 year storage in original package under recommended storage conditions above.
Texture	Light Stucco
Weight	20 oz linear yard
Whiteness	89.44