Large Image
Product Small Image
Item#:  PSTAM  

PSTAM Antimicrobial Pressure Sensitive Matte Laminate Film

  • Recommended for counter and floor graphics
  • PVC free, Environmentally friendly
  • Film with silver ions in a zeolite carrier added to inhibit reproduction of microorganisms
  • Non-volatile controlled mechanism using silver zeolite
  • Excellent slip resistance
  • Lamination extends the life of your print
  • FDA compliance for direct food contact

FINISHING RECOMMENDATIONS Surfaces: Read&Co. laminates are specifically design to work with Read&Co. inkjet media. Read&Co. recommends that you use Read&Co. inkjet media to get the best results. All testing has been done with our branded media. Surface Protection: Insure that your graphic is completely dry prior to laminating. If inks are not dry before lamination the adhesion of the laminate can be adversely affected; outgassing of inks may occur, causing silvering to form under the laminate. Laminating: If too much tension is applied during lamination, the product may curl toward the laminated side, and the edges may lift from the release liner and/or the application surface. Always double-check your machine settings. CARE AND MAINTENANCE Packaging: If the output is being sent without mounting to a substrate such as FoamCore, always roll laminated prints with the graphic facing outward. It is not recommended to ship in a tube smaller than 6” in diameter. Field Care & Maintenance: If graphics should become dirty while out in the field; we suggest using a damp cloth to remove dust and dirt. Do Not use Windex® or other cleaner; these products contain silicon and will damage the graphic. If a damp cloth doesn’t do the job, use a solution up to 20% isopropyl alcohol (one part isopropyl alcohol to four parts water), and gently wipe clean. Markings can be removed by gently using a rubber eraser. Material Handling: Unused laminate material should be placed back in its original packaging and stored at 70ºF (21ºC) for no more than 1 year; to obtain maximum adhesion.

Technical Specifications

ADHESIVE TYPE Permanent Solvent
CALIPER 3.75 mil
FACE MATERIAL 3.75
LINER 1.2 mil
MINIMUM APPLICATION TEMP

50°F (10° C)


Resources

Name
Resources PSTAM.pdf

PSTAM Antimicrobial Pressure Sensitive Matte Laminate Film - 54" X 150'
Availability: In stock
Sku: PSTAM-54
Price: $270.00 ( 0.40 /SQ. FT.)
Recently Viewed Items

TOP