Large Image
Product Small Image
Item#:  PSHGP  

PSHGP 2 mil High Gloss Polyester UV Laminate Film

PSHGP
2 mil High Gloss Polyester UV Laminate Film
is a high gloss polyester lamination film
■ Ideal for photographic prints that require a high gloss finish
■ Polyester base gives this product the highest gloss possible, surpassing PVC films
■ Optically clear adhesive for superior clarity
■ Recommended for abrasion resistance
■ Extends the life of your print and provides UV resistance

FINISHING RECOMMENDATIONS Surfaces: Read&Co. laminates are specifically design to work with Read&Co. inkjet media. Read&Co. recommends that you use Read&Co. inkjet media to get the best results. All testing has been done with our branded media. Surface Protection: Insure that your graphic is completely dry prior to laminating. If inks are not dry before lamination the adhesion of the laminate can be adversely affected; outgassing of inks may occur, causing silvering to form under the laminate. Laminating: If too much tension is applied during lamination, the product may curl toward the laminated side, and the edges may lift from the release liner and/or the application surface. Always double-check your machine settings. CARE AND MAINTENANCE Packaging: If the output is being sent without mounting to a substrate such as FoamCore, always roll laminated prints with the graphic facing outward. It is not recommended to ship in a tube smaller than 6” in diameter. Field Care & Maintenance: If graphics should become dirty while out in the field; we suggest using a damp cloth to remove dust and dirt. Do Not use Windex® or other cleaner; these products contain silicon and will damage the graphic. If a damp cloth doesn’t do the job, use a solution up to 20% isopropyl alcohol (one part isopropyl alcohol to four parts water), and gently wipe clean. Markings can be removed by gently using a rubber eraser. Material Handling: Unused laminate material should be placed back in its original packaging and stored at 70ºF (21ºC) for no more than 1 year; to obtain maximum adhesion.

Technical Specifications

ADHESIVE 1 mil
CALIPER 3 mil
LINER TYPE Craft, PE Coated
MINIMUM APPLICATION TEMP

50°F (10° C)

POLYESTER 2 mil
UV PROTECTION Yes

Resources

Name
Resources PSHGP.pdf

PSHGP 2 mil High Gloss Polyester UV Laminate Film - 38" X 150'
Availability: In stock
Sku: PSHGP-38
Price: $277.20 ( 0.58 /SQ. FT.)
PSHGP 2 mil High Gloss Polyester UV Laminate Film - 51" X 150'
Availability: In stock
Sku: PSHGP-51
Price: $371.80 ( 0.58 /SQ. FT.)
PSHGP 2 mil High Gloss Polyester UV Laminate Film - 54" X 150'
Availability: In stock
Sku: PSHGP-54
Price: $393.80 ( 0.58 /SQ. FT.)
PSHGP 2 mil High Gloss Polyester UV Laminate Film - 61" X 150'
Availability: In stock
Sku: PSHGP-61
Price: $444.40 ( 0.58 /SQ. FT.)
Recently Viewed Items

TOP