Customer Service 1-800-564-READ
View Cart | Order Tracking | Download | News & Events
    
Keyword Search:  
PRODUCTS
ItemNo: PSHGP  
Name: PSHGP 2 mil High Gloss Polyester UV Laminate Film
Brief Description:
PSHGP
2 mil High Gloss Polyester UV Laminate Film
is a high gloss polyester lamination film
■ Ideal for photographic prints that require a high gloss finish
■ Polyester base gives this product the highest gloss possible, surpassing PVC films
■ Optically clear adhesive for superior clarity
■ Recommended for abrasion resistance
■ Extends the life of your print and provides UV resistance
SizeColorUnitsPriceSpecial$/ Sq.Ft.SKU#Add to Cart
38"x150'--Roll (3" Core) $254.00 ----- $0.53PSHGP-38 Add to Cart
51"x150'--Roll (3" Core) $340.50 ----- $0.53PSHGP-51 Add to Cart
54"x150'--Roll (3" Core) $361.00 ----- $0.53PSHGP-54 Add to Cart
61"x150'--Roll (3" Core) $407.50 ----- $0.53PSHGP-61 Add to Cart


Description Specifications Support PDF
FINISHING RECOMMENDATIONS Surfaces: Read&Co. laminates are specifically design to work with Read&Co. inkjet media. Read&Co. recommends that you use Read&Co. inkjet media to get the best results. All testing has been done with our branded media. Surface Protection: Insure that your graphic is completely dry prior to laminating. If inks are not dry before lamination the adhesion of the laminate can be adversely affected; outgassing of inks may occur, causing silvering to form under the laminate. Laminating: If too much tension is applied during lamination, the product may curl toward the laminated side, and the edges may lift from the release liner and/or the application surface. Always double-check your machine settings. CARE AND MAINTENANCE Packaging: If the output is being sent without mounting to a substrate such as FoamCore, always roll laminated prints with the graphic facing outward. It is not recommended to ship in a tube smaller than 6” in diameter. Field Care & Maintenance: If graphics should become dirty while out in the field; we suggest using a damp cloth to remove dust and dirt. Do Not use Windex® or other cleaner; these products contain silicon and will damage the graphic. If a damp cloth doesn’t do the job, use a solution up to 20% isopropyl alcohol (one part isopropyl alcohol to four parts water), and gently wipe clean. Markings can be removed by gently using a rubber eraser. Material Handling: Unused laminate material should be placed back in its original packaging and stored at 70ºF (21ºC) for no more than 1 year; to obtain maximum adhesion.

 
 
  Home | About Us | Products | Promotion | Customer Service | News & Events | Download Center | Order Tracking | Contact Us
Copyright © Read&Co, 2019. All Rights Reserved | Legal Notice | Privacy Policy